8 notes on production of real stone paint mixer machinery

1, Before operation, open the observation gate, outlet, spiral, feed mouth, stir bucket to see if there is no debris, there should be clear, in the real stone paint the operation of the drive part of the operation, is strictly prohibited hands and other hard debris into the inside, otherwise, it is possible to damage and damage the real stone paint equipment.

 

2, In order to extend the life of the motor, power requirements connected to the ground, close the power, start the real stone paint equipment, waiting for its idle 5-10 minutes to confirm the real stone paint equipment no sound, after the feed can be stirred.

 

3, In order to ensure the safety of workers and motor protection, the control switch, all with leakage protection of the air switch or other better protection device.

 

4, Is strictly prohibited non-professionals, in the real stone paint mixer equipment operation, the maintenance operations and real stone paint equipment debugging.

 

5, In the connection line, be sure to pay attention to the motor and the fuselage marked by the steering, logo is consistent. Reversing the possibility of damage to the spiral, but also affect the mixing effect.

 

6, In order to extend the life of real stone paint equipment, the bearing parts, need to fill the oil from time to time, pay attention to: lifting the screw should be filled once a week, add lithium base oil to fill the oil overflow to the best. Fill the position of the butter at the ends of the conveyor screw.

 

7, Ihe engine room should be as ventilated, dry, regularly clean the bag inside the dust.

 

8, Regularly check the degree of tension of the transmission belt, and the connection part of the screw, and make the appropriate adjustments.

#blender #chemicalmachinery #lacquermixer #lacquermixingmachinery #mixer #mixermachine #mixermachinery #realstonepaintmixermachine #reallystonepaintmixermachine