Introduction on indicators of real stone paint construction technology
We use the real stone paint when the construction, there is too much knowledge to learn,real stone paint mixer manufacturers, to tell you the indicators about real stone paint construction technology .
1, spray base oil: the next pot spray gun, pressure 4-7Kg / square centimeter, the construction temperature can not be less than 10 ℃, spray twice, interval of 2 hours, the thickness of about 30 microns, 12 hours at room temperature.
2, spraying real stone paint: the choice of real stone spray gun, air pressure control in the 4-7 kg / square meter, the construction temperature of 10 ℃ or more, the thickness of about 2-3mm, real stone paint manufacturers to tell you if you need to apply two, Then interval of 2 hours, dry 24 hours before grinding.
3, polished: the use of 400 - 600 mesh sandpaper, gently wiping the surface of the real stone can be raised sand. Really stone paint equipment manufacturers suggest that you can not be too hard, otherwise it will damage the film, causing the bottom of the loose, serious will cause poor adhesion, really stone off.
4, spray surface oil: the next pot spray gun, pressure 4-7 kg / square centimeter, the construction of not less than 10 ℃, spray twice, interval of 2 hours, the thickness of about 30 microns, completely dry to 7 days.

评论
发表评论