The use of real stone paint mixer with small details

We use the real stone paint mixer, the machine should be placed on a relatively flat table, and with square blocks will be before and after the two axles, pad up, so that the tire is in an elevated state, to avoid the real stone paint mixer at the time of the start, happened to move around.
 
Under normal circumstances, the real stone paint mixer is to implement the secondary leakage protection, after the power supply, the need for detailed empty test, to confirm that there is no problem, you can use, in the real stone paint mixer operation time, to observe the speed of operation of the mixing cylinder, is not in a normal state, in general, the empty car running faster than the speed of operation after loading 2 to 3 laps or so.
 
If the laps are much worse, you need to adjust the ratio between the drive wheel and the wheel. Then confirm the direction of rotation of the stirring cylinder, is not the same direction as the arrow indicates, if it is not the same, you need to immediately change the wiring of the motor, so that their direction becomes consistent.
 
Check the sensitivity of the clutch and the brake to confirm that there is no sign of damage to the wire rope, and the track pulley is not intact, there is no obstacle around the real stone paint mixer, the lubrication of each part Is it enough. In each operation is completed or do not need to use the time, must pull the gate power, the switch box lock.


评论

此博客中的热门博文

Invented the real stone paint equipment market segments

How to do it when using a real stone paint mixer with a tripping operation?

Based on the characteristics of paint to customize real stone paint mixer