Mechanical field: real stone paint mixer motor common faults and explanation
Really stone paint mixer in the field of mechanical applications is very wide, it is a typical stone equipment, mixing, in the current construction site is very common. The correct use of real stone paint mixer is an important prerequisite for ensuring the efficient production of dry powder. Really stone paint mixer manufacturers, as we bring the putty powder mixer equipment, motor fault analysis and solutions, hope for the manufacturers to help.
1, real stone paint mixer, the motor controller is bad: how to test, test the controller is broken? Use multimeter DC voltage file, measure, the pilot output, white wiring, if there is about 5 volts voltage input Indicating that the normal operation of the tube, if there is no voltage input, then the dispenser burned, you need to replace the controller.
2, check the electromechanical wiring is loose: the wiring plug, are re-check again, if the contact is bad, mostly battery box, into the frame when not in place.
3, the motor overheating, resulting in short circuit: real stone paint mixer, in the operation, if the continuous operation of overload, or motor two-phase, running, the motor internal short circuit situation.
If the real stone paint mixer motor, in the operation of the time, there are problems, the reasons are generally more than a few, the user can detect these components for investigation.



评论
发表评论